ISE continues to spread the news about our exceptional ability to address complex industry challenges. As business entities learn more about the opportunity for impactful collaborations with us, the media is also taking notice of the exciting work going on at ISE.

News SourceTopic
WRAL News LogoResearchers: NC could have 4 times number of reported coronavirus infections - Featuring Julie Swann. Watch the Video
July, 2020
The News & Observer LogoHow many North Carolinians have had COVID-19? These researchers have an estimate - Featuring Julie Swann. View the Article
July, 2020
Finger Lakes Times LogoHow many in North Carolina have had COVID-19? These researchers have an estimate - Featuring Julie Swann. View the Article
July, 2020
World Journal Logo23州和華府 7天平均新冠確診數 比上周增逾10% - Featuring Julie Swann. View the Article
June, 2020
Radio Health Journal LogoProtests Amid The Pandemic - Featuring Julie Swann. View the Article
June, 2020
Pahrump Valley TimesExperts say Nevada still in ‘first wave’ of coronavirus cases - Featuring Julie Swann. View the Article
June, 2020
World Journal Logo23州和華府 7天平均確診數增逾10% - Featuring Julie Swann. View the Article
June, 2020
Newsmax LogoExpert Tips for Throwing a Socially Distant Party - Featuring Julie Swann. View the Article
June, 2020
KRMG News LogoPandemic expert says spike in COVID-19 cases in Oklahoma is not ‘second wave' - Featuring Julie Swann. View the Article
June, 2020
Cleveland Scene LogoLockdowns May Have Averted 60 Million Coronavirus Infections in U.S. Alone - Featuring Julie Swann. View the Article
June, 2020
KOBI Fox 23 LogoPandemic expert says spike in COVID-19 cases in Oklahoma is not ‘second wave' - Featuring Julie Swann. View the Article
June, 2020
Herald-Mail Media LogoMike Pence says America is ‘winning the fight’ against COVID-19. Is he right? - Featuring Julie Swann. View the Article
June, 2020
The Baltimore Sun LogoHow do Maryland’s coronavirus trends stack up to other states'? Things look good so far, but danger isn’t over - Featuring Julie Swann. View the Article
June, 2020
World Casino News LogoNevada regulators issue new mask-wearing rule for table games without plexiglass - Featuring Julie Swann. View the Article
June, 2020
CNBC LogoCasino regulators tighten mask rules as coronavirus cases spike in Las Vegas - Featuring Julie Swann. View the Article
June, 2020
Atlanta Journal Constitution LogoTips on how to have a safe summer barbecue amid coronavirus - Featuring Julie Swann. View the Article
June, 2020
Las Vegas Review-Journal LogoExperts say Nevada still in ‘first wave’ of coronavirus cases - Featuring Julie Swann. View the Article
June, 2020
Las Vegas Review-Journal LogoExperts fear ‘tsunami’ of new coronavirus cases in Nevada - Featuring Julie Swann. View the Article
June, 2020
INFORMS LogoPreparing for a second wave of COVID-19, featuring Julie Swann - Featuring Julie Swann. Listen to the Podcast
June, 2020
Spectrum News LogoReopening From Coronavirus: Lessons From South Korea - Featuring Julie Swann. Watch the Video
June, 2020
Science News logoLockdowns may have averted 531 million coronavirus infections - Featuring Julie Swann. View the Article
June, 2020
Future of Sourcing LogoFix our Broken Medical Supply Chains - Featuring Julie Swann. View the Article
June, 2020
Tallahassee Democrat LogoSpike in new coronavirus cases 'inevitable,' experts say. Is Florida prepared? - Featuring Julie Swann. View the Article
June, 2020
The Washington Post logoAmid reopenings and street protests, coronavirus transmission remains high in much of the U.S. - Featuring Julie Swann. View the Article
June, 2020
Delish LogoYou May Be Able To Have A Barbecue This Summer, But It Will Take Some Planning And Precautions - Featuring Julie Swann. View the Article
June, 2020
Government Technology LogoA Second Wave of Coronavirus Could Mean a Devastating Fall - Featuring Julie Swann. View the Article
June, 2020
Ladders LogoThis is what happens when you swim during the COVID-19 pandemic - Featuring Julie Swann. View the Article
May, 2020
The Wichita Eagle LogoThis is what happens when you swim during the COVID-19 pandemic - Featuring Julie Swann. View the Article
May, 2020
Government Technology LogoCellphone Data Illustrates Where Ohioans Stayed Home - Featuring Julie Swann. View the Article
May, 2020
The Columbus Dispatch LogoCellphone tracking shows Ohioans staying home - Featuring Julie Swann. View the Article
May, 2020
Akron Beacon Journal LogoCellphone tracking tells where Ohioans stayed home during height of coronavirus - Featuring Julie Swann. View the Article
May, 2020
Medpage Today LogoEnlisting in the COVID-19 Recovery Army - Featuring Julie Swann. View the Article
May, 2020
Physics Today LogCOVID-19 pandemic modeling is fraught with uncertainties - Featuring Julie Swann. View the Article
May, 2020
SME LogoThe 20 Most Influential Professors in Smart Manufacturing - Featuring Binil Starly. View the Article
May, 2020
Health IT Analytics LogoHow Will Big Data Analytics Factor into the Next Phase of COVID-19? - Featuring Julie Swann. View the Article
May, 2020
Health IT Analytics Logo3 States to Use Apple, Google COVID-19 Contact Tracing System - Featuring Julie Swann. View the Article
May, 2020
Los Angeles Times LogoSo you really want to see your friends? Here’s how to assess the risk - Featuring Julie Swann. View the Article
May, 2020
BioWorld LogoRoche snags FDA nod for COVID-19 antibody test - Featuring Julie Swann. View the Article
May, 2020
BioWorld LogoAntibody testing for COVID-19 prepares for its closeup in bid to ease pandemic restrictions - Featuring Julie Swann. View the Article
May, 2020
The News & Observer logoTo get COVID-19 funding, NC officials must give more data on tests, deaths, recoveries - Featuring Julie Swann. View the Article
May, 2020
The Gaston Gazette logoGastonia native leads N.C. State’s face shield production - Featuring Matt White. View the Article
April, 2020
Knox News LogoYour guide to making sense of COVID-19 models, and what they mean for Tennessee - Featuring Julie Swann. View the Article
April, 2020
Futurity logoNew tools to help manage volunteers in the wake of a disaster could benefit emergency response and relief managers - Featuring Maria Mayorga. View the Article
April, 2020
The Hill LogoCOVID-19 is still spreading — is your city ready? - Featuring Julie Swann. View the Article
April, 2020
FiveThirtyEight logoHow COVID-19 Is Wreaking Havoc On Our Ability To Make Things — Including Vaccines - Featuring Julie Swann. View the Article
April, 2020
Science Daily - Your source for the latest research newsTools to help volunteers do the most good after a disaster - Featuring Maria Mayorga. View the Article
April, 2020
The NJ Star Ledge logoWhen will we get back to normal? Here’s the way out of coronavirus quarantine in N.J. - Featuring Julie Swann. View the Article
April, 2020
Scientific American LogoEngineers Offer DIY Solutions to Coronavirus Equipment Shortages - Featuring Julie Swann. View the Article
April, 2020
The News & Observer logoExperts: Racism, misinformation fuel NC’s high coronavirus rate among blacks, Hispanics - Featuring Julie Ivy. View the Article
April, 2020
The News & Observer logoNC coronavirus cases increased by more than 1,600 this week; churches prep for online Easter services - Featuring Julie Swann. View the Article
April, 2020
Los Angeles Times LogoWe can’t shelter in place forever: How the coronavirus lockdown might end - Featuring Julie Swann. View the Article
April, 2020
Los Angeles Times LogoCoronavirus Today: What a return to normal might look like - Featuring Julie Swann. View the Article
April, 2020
The News & Observer LogoCoronavirus total tops 4,000 in NC; third Orange County nursing home resident dies - Featuring Julie Swann. View the Article
April, 2020
The Lewiston Tribune LogoWe can’t shelter in place forever, right? - Featuring Julie Swann. View the Article
April, 2020
WRAL Tech Wire LogoNCSU uses 3D printing tech to produce 200 face shields a day for WakeMed - Featuring Matt White. View the Article
April, 2020
WNCN 17 CBS logoNC State 3D printing face shields for WakeMed employees - Featuring Matt White. View the Article
April, 2020
Science News logoHow coronavirus control measures could affect its global death toll - Featuring Julie Swann. View the Article
April, 2020
Politico LogoPOLITICO Nightly: Coronavirus Special Edition - Featuring Julie Swann. View the Article
April, 2020
Kansas City Star Logo‘Half-hearted effort’: Experts say Missouri governor’s stay-at-home order too porous - - Featuring Julie Swann. View the Article
April, 2020
KPBS logoUnderlying Health Disparities Could Mean Coronavirus Hits Some Communities Harder - Featuring Julie Swann. View the Article
April, 2020
Go Dan River logo3 new COVID-19 cases emerge in Danville-Pittsylvania district; officials say they are prepared, have necessary supplies for now - Featuring Julie Swann. View the Article
April, 2020
Blue Ridge Public Radio LogoUnderlying Health Disparities Could Mean Coronavirus Hits Some Communities Harder Featuring Julie Swann. Listen to the Podcast
April, 2020
The News & Observer logoZero to 1,000 in 25 days: The story of coronavirus in NC is far from over, experts say - Featuring Julie Swann. View the Article
March, 2020
The Durham Herald Sun logoZero to 1,000 in 25 days: The story of coronavirus in NC is far from over, experts say - Featuring Julie Swann. View the Article
March, 2020
The Washington Post logoA New York hospital is treating two patients on a device intended for one - Featuring Julie Swann. View the Article
March, 2020
Route Fifty logoIs America Ready for a Second Wave of Coronavirus? - Featuring Julie Swann. View the Article
March, 2020
WJLA | ABC 7 | Washington, DCNC professor who served as an advisor during H1N1 pandemic discusses COVID-19 response - Featuring Julie Swann. View the Article
March, 2020
Live Science LogoWhen will 'social distancing' end? - Featuring Julie Swann. View the Article
March, 2020
Go Dan River logoWith hospital space a national worry, medical experts brace for surge in coronavirus cases - Featuring Julie Swann. View the Article
March, 2020
WRAL NewsNCSU professor examines impacts of COVID-19 pandemic - Featuring Julie Swann. Watch the Video
March, 2020
EurekAlert! | The Source for all Science NewsNew tool aims to expedite military evacuation of civilians during crisis - Featuring Brandon McConnell. View the Article
March, 2020
Forbes LogoWith The New Coronavirus, Should You Avoid Large Meetings Like The MWC? - Featuring Julie Swann. View the Article
February, 2020
 
News SourceTopic

2019

EurekAlert! | The Source for all Science NewsNew model identifies most efficient logistics for military operations - Featuring Brandon McConnell. View the Article
July, 2019
WRAL Tech Wire LogoNCSU researchers’ new tool aims to take risk out of logistics for military deployments - Featuring Brandon McConnell. View the Article
July, 2019
World Pro NewsModeling tool addresses uncertainty in military logistics planning - Featuring Brandon McConnell. View the Article
July, 2019
Science DailyModeling tool addresses uncertainty in military logistics planning - Featuring Brandon McConnell. View the Article
July, 2019
PHYS.orgModeling tool addresses uncertainty in military logistics planning - Featuring Brandon McConnell. View the Article
July, 2019
Medical XpressA Revolution in Regenerative Medicine - Featuring Rohan Shirwaiker. View the Article
June, 2019
3D Printing Industry LogoGET YOUR CELLS IN A ROW – NC State team enhance accuracy of 3D bioprinting with ultrasound - Featuring Rohan Shirwaiker. View the Article
April, 2019
WRAL Tech Wire LogoNCSU researchers develop ultrasound technique to improve bioprinted tissues - Featuring Rohan Shirwaiker. View the Article
April, 2019
Ultrasound aligns living cells in bioprinted tissues - Featuring Rohan Shirwaiker. View the Article
April, 2019
MedGadget | News and UpdatesAligning Living Cells Within 3D Printed Tissues Using Ultrasound - Featuring Rohan Shirwaiker. View the Article
April, 2019
Science Daily - Your source for the latest research newsClose flu vaccine supply gaps to ease flu seasons, make pandemics less deadly - Julie Swann. View the Article
January, 2019
 
News SourceTopic

2018

ISE Magazine logoSomebody call 911? Dealing with uncertainty helps emergency services respond more efficiently - Featuring Shakiba Enayati, Maria Mayorga, and Ozman Ozaltin,
August, 2018
ISE Magazine logoWhen CNC Machines go a-Twitter - Featuring Binil Starly and Atin Angrish. View the Article (IISE membership required)
June, 2018
MIT Technology Review LogoMeet the blockchain for building better widgets, cheaper and faster - Featuring Binil Starly . View the Article
May, 2018
Researchers propose a blockchain data network to boost manufacturing - Featuring Binil Starly and Atin Angrish. View the Article
April, 2018
Space Daily LogoResearchers propose a blockchain data network to boost manufacturing - Featuring Binil Starly and Atin Angrish. View the Article
April, 2018
WRAL Tech Wire LogoNCSU researchers propose blockchains to link manufacturers - Featuring Binil Starly and Atin Angrish. View the Article
April, 2018
Felix Facts Logo3-D printing used to create metallic glass alloys - Featuring Ola Harrysson and Zaynab Mahbooba. View the Article
March, 2018
Viral Pearl Logo3-D printing used to create metallic glass alloys - Featuring Ola Harrysson and Zaynab Mahbooba. View the Article
March, 2018
Technology Alpha Logo3-D printing used to create metallic glass alloys - Featuring Ola Harrysson and Zaynab Mahbooba. View the Article
March, 2018
The CW22 | MyRDCShow 106 Virtual Reality - Featuring Karen Chen, Tyler Rose, Rebecca Ellis, and Ken Chen. Watch the Videos
March, 2018
WUNC 91.5Researchers Develop Model To Help Food Banks Distribute Food - Featuring Julie Ivy and Reha Uzsoy. View the Article
March, 2018
NSF Science 360Research Improves Food Bank Effectiveness, Equity - Featuring Julie Ivy and Reha Uzsoy. View the Article
March, 2018
WRAL Tech Wire LogoNCSU, NC A&T aim to improve food bank productivity, cut waste with new computer models, software - Featuring Julie Ivy and Reha Uzsoy. View the Article
February, 2018
NSF Science 360New Technique Allows Printing of Flexible, Stretchable Silver Nanowire Circuits - Featuring Jingyan Dong. View the Article
February, 2018
 
News SourceTopic

2017

The EngineerUS researchers develop technique for printing flexible metal circuits - Featuring Jingyan Dong. View the Article
December, 2017
Nano WerkMetal printing offers low-cost way to make flexible, stretchable electronics - Featuring Jingyan Dong. View the Article
December, 2017
Tech XploreMetal printing offers low-cost way to make flexible, stretchable electronics - Featuring Jingyan Dong. View the Article
December, 2017
Science Daily - Your source for the latest research newsMetal printing method developed at NCSU may lead to flexible, stretchable electronics - Featuring Jingyan Dong. View the Article
December, 2017
Metal printing method developed at NCSU may lead to flexible, stretchable electronics - Featuring Jingyan Dong. View the Article
December, 2017
ISE Magazine logoFinal Five - Featuring Anton Ipsen. View the Article
October, 2017
WRAL NewsNC State Unveils New Driving Simulator - Featuring Mei Ying Lau. Watch the Video
July, 2017
IEEE - Systems, Man, and Cybernetics SocietyNew IEEE Human-Machine Systems Impact Factor = 2.493 - Featuring David Kaber. Read the Article
July, 2017
CBS North Carolina | WNCNNC State researchers use simulator to make roads safer - Featuring David Kaber. Watch the Video
WRAL NewsMore Highway Signs Could be Coming to a Roadside Near You - Featuring David Kaber. Watch the Video
May, 2017
Industry Week MagazineHow Universities and Talent are Turning North Carolina into a 3D Printing Hub - Featuring Ola Harrysson. View the Article
April, 2017
WRAL NewsWilliams Looking to Play Moneyball, But with Hoops - Featuring Ashley Williams. Watch the Video
March, 2017
CBS North Carolina | WNCNNC State study looks to create safer in-car systems for police - Featuring David Kaber and Maryam Zahabi. Watch the Video
February, 2017
IISE Logo | Institute of Industrial EngineersInstitute of Industrial and Systems Engineers Elects New Officers - Featuring Tim McGlothlin. View the Article
February, 2017
Benzinga LogoInstitute of Industrial and Systems Engineers Elects New Officers - Featuring Tim McGlothlin. View the Article
February, 2017
Industry TodayUsing Stochastic Models and Systems Engineering to better forecast and reduce ED wait times - Featuring Dr. Yunan Liu. View the Article
February, 2017
WRAL Sports Fan.com From walk-on to starter, Williams thriving with ranked Wolfpack - Featuring Ashley Williams. Watch the Video
January, 2017
NC State AthleticsSpencer and Williams Selected for WBCA Coaching Workshop - Featuring Ashley Williams. View the Article
January, 2017
NC State's Technician OnlineIpsen forging legacy at NC State - Featuring Anton Ipsen. View the Article
January, 2017
NC State's Technician OnlineNC State's Engineers Without Borders constructs clean water source in Sierra Leone - Featuring Amy Belivacqua. View the Article
January, 2017
Swimming World MagazineAnton Ipsen Soars to 1500 Free Gold at 2017 Arena Pro Series Austin - Featuring Anton Ipsen. View the Article
January, 2017
NBC Sports NetworkIpsen holds onto early lead, wins men's 400m free - Featuring Anton Ipsen. Watch the Video
January, 2017
 
News SourceTopic

2016

WRAL NewsNC State engineers use video game tech to rehab injury, stroke patients - Featuring Dr. Karen Chen. Watch the Video
November, 2016
Health IT AnalyticsUsing Big Data Analytics, Systems Engineering to Tackle Sepsis - Featuring Dr. Julie Ivy. View the Article
October, 2016
CBS North Carolina | WNCNNC State student using simulation software to help hospitals run more efficiently - Featuring Nishant Singh. Watch the Video
October, 2016
SAS | JMP Foreword MagazineNavigating Road Safety Improvements - Featuring Maryam Zahabi. View the Article
September, 2016
Health Data Management LogoResearchers tap Mayo, Christiana Care EHR data to fight sepsis - Featuring Dr. Julie Ivy. View the Article
September, 2016
Compound SemiconductorUS researchers use SiC to boost vehicle range - Featuring Dr. Harvey West. View the Article
September, 2016
Science DailyNew tech promises to boost electric vehicle efficiency, range - Featuring Dr. Harvey West. View the Article
September, 2016
WRAL NewsNC State student uses medical data to boost hospital efficiency - Featuring Dr. Julie Ivy and Nishant Singh. Watch the Video
August, 2016
Modern Healthcare MagazineTeen researcher makes hospital efficiency his mission - Featuring Nishant Singh. View the Article
August, 2016
WRAL News NC State engineering student helps hospitals - Featuring Nishant Singh. Watch the video
August, 2016
WRAL Sports FanAddison preps for track & field Olympic trials - Featuring Alumnus Jonathan Addison. Watch the video
June, 2016
WRAL News Traffic at Enloe High School prompts change on campus - Featuring Dr. Anita Vila-Parrish. Watch the video
June, 2016
ABC11 WTVD Eyewitness NewsStudy of Enloe High's carpool woes is finished - Featuring Dr. Anita Vila-Parrish. Watch the video
May, 2016
IEEE LogoKaber is New Editor-in-Chief of IEEE Transactions on Human-Machine Systems - Featuring Dr. David Kaber. View the Article
May, 2016
Women Engineering MagazineNorth Carolina State Industrial & Systems Engineering Women - Featuring Dr. Anita Vila-Parrish. View the article (page 10)
April, 2016
CBS North Carolina | WNCNNC State researchers trying to regenerate organs to save lives - Featuring Dr. Richard Wysk, Pedro Huebner and Katie Basinger. Watch the video
April, 2016
News 14 CarolinaUNC President Margaret Spellings Tours NC State - Featuring Dr. Ola Harrysson and Carter Keough. Watch the video
April, 2016
CBS North Carolina | WNCNSpellings, who has faced protesters lately, has a quiet visit to N.C. State - Featuring Dr. Ola Harrysson and Carter Keough. View the article
April, 2016
The News & ObserverMargaret Spellings’ campus tour takes in technology at NCSU - Featuring Dr. Ola Harrysson and Carter Keough. View the article
April, 2016
Education DiveRecruitment Support Necessary to Boost Women in STEM Majors - Featuring Dr. Anita Vila-Parrish. View the article
April, 2016
Robotics TomorrowRobots Helping Grads Get Jobs - Featuring Jason Low. View the article
April, 2016
CNN's Great Big StorySolving Hunger with Numbers - Featuring Dr. Julie Ivy. Watch the video
March, 2016
CBS North Carolina | WNCNFrom Wright Brothers to commercial drones, NC leading the way - Featuring Dr. Maria Mayorga and Ben Rachunock. Watch the video
March, 2016
WNCN News ChannelNC State student creates play predictor - Featuring Will Burton.
February, 2016
WRAL Sports FanWhat play is next? NCSU students create model to predict it - Featuring Will Burton. Watch the Video
February 2016
ABC11 WTVD Eyewitness NewsNC State working on Enloe High School traffic problem - Featuring Dr. Anita Vila-Parrish. Watch the video
February, 2016
The News & ObserverNC State students hope to find solution to Enloe High School’s carpool woes - Featuring Dr. Anita Vila-Parrish. View the article
February, 2016
Tech News WorldThe Future of Deliveries Will Be Driverless - Featuring Dr. Michael Kay. View the article
January, 2016
 
News SourceTopic

2015

Bonezone by OrthoworldThe Future of Nanotechnology in Orthopaedics - Featuring Dr. Rohan Shirwaiker. View the article
December, 2015
Triangle Business JournalN.C. State researcher: Soon, driverless vehicles will bring groceries to your house - Featuring Dr. Michael Kay. View the article
December, 2015
Occupational Health & SafetyThe Importance of Worker Knowledge in Slips, Trips, and Falls and the Utility of Virtual Reality-based Locomotion Research - Featuring Dr. Carl Pankok and Dr. David Kaber. View the article
December, 2015
Advance Healthcare NetworkHow Advanced Analytics Will Transform Healthcare - Featuring Dr. Julie Ivy and Karen Hicklin.
November 2015
Medical NewsNanotechnology Meeting its Potential - Featuring Dr. Rohan Shirwaiker.
November, 2015
Industry TodayNNMI: Investing in the Future of U.S. Manufacturing Competitiveness and Leadership - Featuring Dr. Richard Wysk. View the article
September, 2015
American Scientist3D Printing Replacement Body Parts - Featuring Dr. Richard Wysk.
August, 2015
Manufacturing NewsNC State Industrial Engineers Print Titanium Football - Featuring Dr. Tim Horn. View the article
June, 2015
Make Parts FastEngineers 3D print a titanium football replica - Featuring Dr. Tim Horn. View the article
April, 2015
3D Print.comNC State’s Chancellor Receives Surprise Titanium 3D Printed Football Prior to Spring Game Today - Featuring Dr. Tim Horn. View the article
April, 2015
Controlled EnvironmentsHut, Hut, Hike! University Develops 3D Football - Featuring Dr. Tim Horn. View the article
April, 2015
Plant ServicesFootball goes titanium with the help of 3D printing - Featuring Dr. Tim Horn. View the article
April, 2015
Design WorldEngineers 3-D Print a Titamium Football Replica - Featuring Dr. Tim Horn.
April, 2015
IMPOPhoto of the Day: NC State Engineers Print a Titanium Football - Featuring Dr. Tim Horn. View the article
April, 2015
PHYS,orgSilver shines as antibacterial for medical implants - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
I F#%&ing Love Science!Silver shines as antibacterial for medical implants - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
Triangle Business Journal |N.C. State researchers wield potential 'silver bullet' to killing superbugs and improving hip replacements - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
Nanotechnology NowSilver implant nanotech killing infections: NC State Industrial & Systems Engineering Research Team Arms Implants With Battery-Activated Nanotechnology - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
MDT | Medical Design Technology‘Silver Bullet’ Implantable Device Prevents Infection - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
Becker's Spine ReviewNC State University engineers incorporate nanotechnology into orthopedic implants to prevent infection - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
Open Health NewsNC State Develops Silver Nanotechnology to Kill Superbugs and Infections - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
Nano WerkNanotechnology enhanced orthopedic implants fight infection - Featuring Dr. Rohan Shirwaiker and George Tan. View the article
March, 2015
UNC tvNorth Carolina Now Feb. 17 - Featuring Dr. Paul Cohen. Watch the Video
February, 2015
News 14 CarolinaCapital Tonight Jan. 15: Proposed Medicaid Changes - Featuring Dr. Paul Cohen. Watch the Video
January, 2015
NC Health NewsNC State-Community Care Partnership to Decrease Costs, Improve Patient Care - Featuring Dr. Paul Cohen.
January, 2015
Control DesignSensors: Automation for nanopositioning systems - Featuring Dr. Jingyan Dong. View the article
January, 2015
WRAL.comISE partners with CCNC to improve healthcare in our state. Watch the video
January, 2015
Design WorldQ&A with NC State’s Dr. Paul Cohen. View the article
January, 2015
Industrial Research InstituteAdvanced Manufacturing: Rethinking How Things Get Made - Featuring Dr. Ricahrd Wysk.
January, 2015
 
News SourceTopic

2014

WNCN News ChannelNASA to launch 3D-printed commemorative NC State coin into space - Featuring Dr. Tim Horn.
December, 2014
WRAL TechwireNCSU part of NASA Orion launch with 3D print technology - Featuring Dr. Tim Horn. View the article
December, 2014
NSF | National Science FoundationEngineering a better food bank - Featuring Dr. Julie Ivy and Irem Sengul. View the article
December, 2014
WNCN News ChannelStanding at the front lines against the impending flu epidemic - Featuring Dr. Osman Ozaltin.
November, 2014
Manufacturing ConnectionExtending capabilities of additive manufacturing - Featuring Dr. Ola Harrysson and Dr. Richard Wysk. View the article
October, 2014
WRAL TechwireNCSU Nobel Laureate: "We have to reduce greenhouse gases" - Featuring Dr. Rajendra Pachauri. View the article
October, 2014
Industry TodayCustomizing manufacturing’s future - Featuring Dr. Ola Harrysson.
October, 2014
Industry WeekIndustrial engineers and the manufacturing renaissance - Featuring Dr. Paul Cohen. View the article
September, 2014
Modern Pumping TodayFlexible manufacturing means sustainable manufacturing - Featuring Dr. Ola Harrysson. View the article
September, 2014
Design NewsPrograms and technology boost manufacturing's return - Featuring Dr. Richard Wysk. View the article
August, 2014
Surgical ProductsMultidisciplinary Approach To Engineered Tissue Commercialization - Featuring Dr. Rohan Shirwaiker and Dr. Ola Harrysson. View the article
July, 2014
IIE | Institute of Industrial EngineersEngineers use 3D printers to make new organs and joints - Featuring Dr. Paul Cohen, Dr. Ola Harrysson and Dr. Binil Starly.
June, 2014
Product Design DevelopmentEngineers Find Way to Lower Risk of Midair Collisions for Small Aircraft - Featuring Dr. David Kaber and Carl Pankok. View the article
May, 2014
Bioscience TechnologyPrinting Replacements - Featuring Dr. Ola Harrysson and Dr. Binil Starly. View the article
May, 2014
WUNC 91.5GPS Improvements Could Reduce Plane Crashes - Featuring Dr. David Kaber. View the article
May, 2014
KGO tvEngineers use 3D printers to make new organs and joints - Featuring Dr. Paul Cohen, Dr. Ola Harrysson and Dr. Binil Starly. Watch the video
May, 2014
BioPortfolioOrgans Printed on Demand: The challenges of taking engineered tissue from the lab to the bedside - Featuring Dr. Binil Starly.
May, 2014
Biotech DailyProject to Move Engineered Tissue and Organs from Lab to the Bedside, Operating Room - Featuring Dr. Binil Starly. View the article
May, 2014
Triangle Business Journal |Here is the next wave in 3D printing — human organs — courtesy of N.C. State University - Featuring Dr. Binil Starly. View the article
May, 2014
WRAL NewsISE's Dr. Binil Starly talks about the future of 3D printed organs on WRAL morning news.
May, 2014
News 14 CarolinaThousands attend NC State Engineering Career Fair - Featuring Dr. Anita Vila-Parrish.
February, 2014
WNCN News ChannelCompanies flock to Engineering Career Fair at NC State - Featuring Dr. Anita Vila-Parrish.
February, 2014
Triangle Business Journal |Here is the next wave in 3D printing — human organs — courtesy of N.C. State University - Featuring Dr. Binil Starly. View the article
May, 2014
WRAL NewsISE's Dr. Binil Starly talks about the future of 3D printed organs on WRAL morning news.
May, 2014
News 14 CarolinaThousands attend NC State Engineering Career Fair - Featuring Dr. Anita Vila-Parrish.
February, 2014
WNCN News ChannelCompanies flock to Engineering Career Fair at NC State - Featuring Dr. Anita Vila-Parrish.
February, 2014